Closeout Specials

These great products are on special because we're phasing them out of our product line. They all carry a full warranty and we stand behind them 100%.

Order quickly because quanities are really, really limited.

NUT PLATE BLOCK, 8-32
P/N CA-NPB8
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
NUT PLATE BLOCK 10-32
P/N CA-NPB10
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
CYCLO FOAM BONNETS (WHITE)
P/N CY71-110
This superfine pad is used in final buffing, after polishing with other pads. It's excellent for applying sealants and buffing out wax. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$10.95 Qty
HIGH SPEED PANEL SAW
P/N ATS8512
High speed saw designed to quickly cut through hard materials such as composites, fiberglass, and ceramics. Includes diamond cutting wheel.
Closeout:$139.95 Qty
AEROTEX
P/N 588975T
This bleached crimped wiping cloth is manufactured from 100% cotton. Its unique finish is ideal for use whenever a wiping or polishing cloth is needed.
Closeout:$14.95 Qty
NUTPLATE BLOCK, 4-10
P/N CA-NPB4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
NUTPLATE BLOCK, 1/4-20
P/N CA-NPB-1/4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-5/32
Replacement punch and die for #45 hand punch. 5/32" size
Closeout:$11.95 Qty
CYCLO FOAM BONNETS (YELLOW)
P/N CY71-135
A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$11.95 Qty
CARBIDE BURR (3/4 x 1 CYL SGL CUT)
P/N SA-S7
3/4" diameter by 1" long Cylindrical Carbide Burr (Type SA). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$74.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-40
Replacement punch and die for #45 hand punch. #40 size
Closeout:$11.95 Qty
BIT, POWER SCREWDRIVER
P/N 1204
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
9" CRIMPING WIRE CUTTING STEEL PLIERS
P/N PM-924
The 9" Steel Wire Cutting Crimping Pliers has a high quality SCM 440 hot-riveted design that features smooth wobble-free operation. It's High-Leverage design provides greater cutting and gripping power.
Closeout:$23.95 Qty
RATCHETING CRIMPER FOR NON-INSULATED TERMINALS
P/N CP-353
Save up to 35% energy with this new mechanism Ratchet Crimping Tool! The accurate crimping mold and self locking / releasing mechanical unit design ensure high crimping quality when crimping repeatedly.
Closeout:$55.95 Qty
BIT, POWER SCREWDRIVER
P/N 1205
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
REPLACEMENT BULB (STEELMAN 50101)
P/N 05515
Replacement bulb for Steelman Inspector 50101
Closeout:$4.95 Qty
SCOTCH-BRITE HAND PADS (HEAVY DUTY)
P/N 7440B
Heavy duty (tan) pads are very aggressive. A high mineral content makes these pads cut fast to remove contaminants and oxides. Recommended for corrosion removal jobs. Each box contains ten (10) 6"x9" pads. Manufactured by 3M
Closeout:$39.95 Qty
NONWOVEN PUREWIPE
P/N 992130
Your plane can get so dirty and full of unwanted substances that it may just start to look sickly. Whatever ails your aircraft in terms of soiled surfaces can be cured with American Fiber's Purewipe Cleaning Cloths.
Closeout:$6.95 Qty
LIGHTNING DETECTOR
P/N LD7
Ideal for early storm warnings, storm directions and protection for any outdoor activity.
Closeout:$61.95 Qty
DRILL BIT 6" AIRCRAFT EXTENSION
P/N 013-1
#1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
Closeout:$3.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-21
Replacement punch and die for #45 hand punch. #21 size
Closeout:$11.95 Qty
NIGHT COM UV LED
P/N 51046
This flashlight produces 115 lumens on high and 50 lumens on low. Mode selection switch from high, low, LED, and safety. Runs up to 10 hours when using the UV LEDs. 1 meter impact resistance tested.
Closeout:$89.95 Qty
PUREWIPE CHEESECLOTH
P/N 588039C
Made from 100% woven cotton, our cheesecloth is very soft and absorbent. The openness of the weave assures the user that the wiping cloth will not displace the contaminants on the surface.
Closeout:$45.95 Qty
GREIDER TACK CLOTH
P/N 700844
This premium silicone-free tack cloth is the product of choice in certain painting applications. It is the product of choice for electronics manufacturers. It is an outstanding clean room tack cloth.
Closeout:$99.95 Qty
RYMPLECLOTH
P/N 780332
Manufactured with 100% purified woven cotton, it’s unique crimped finish and firmly twisted yarns lift, entrap and remove particulates and, residual surface contamination.
Closeout:$13.95 Qty
STREAMLIGHT PROTAC HL 3
P/N 88047
This powerful flashlight has C4 LED, with a 50,000 hour lifetime. Multi-function, push-button tactical tail switch allows for easy one-handed operations. Waterproof to 1 meter for 30 minutes; 1 meter impact resistance tested.
Closeout:$89.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL
P/N AMT-G3H
Dale Crane's AMT Series is the essential resource to pass the FAA’Knowledge Exams for Aviation Maintenance. The General text covers the first section of the FAA?s required curriculum, incorporating an introduction to aviation.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: POWERPLANT
P/N AMT-P3
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Powerplant details the technical maintenance of turbine and reciprocating engines.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: STRUCTURES
P/N AMT-STRUC-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Airframe: Structures details the subjects associated with aircraft structures as they relate to the landing gear.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: SYSTEMS
P/N AMT-SYS-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Systems covers the various systems involved with the airframe.
Closeout:$49.95 Qty
CYCLO MICROFIBER PAD COVERS (TERRY)
P/N CY73-530
The preferred cover for applying polish and buffing wax. Its hooked fibers remove surface residue effectively while leaving a high-gloss finish. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$12.95 Qty
LIGHTNING DETECTOR, DELUXE
P/N LD50
This portable and ground-based unit comes in a rugger, weather-resistant plastic case and is more powerful that other units and will detect storms within 40 miles but will start detecting thunderstorms up to 70 miles away.
Closeout:$259.95 Qty
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
P/N SH-S1
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$25.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
P/N SK-D6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$39.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
P/N SK-S6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$38.95 Qty
BULB, HALAGEN FOR VO SCOPES
P/N VO-1
Halagen bulb for Vo-Scope
Closeout:$12.95 Qty
MAGNAFLUX® BLACKLIGHT (100 WATT)
P/N ZB-23A
100 watt Black Light for the Magnaflux Zyglo tester. Very high intensity short-wave ultraviolet (UV) light used to illuminate Magnaflux Zyglo and other dies that will fluoresce under black light. Includes transformer and power control unit.
Closeout:$995.95 Qty