• Use Promo
  • in the next
  • 00:00:00
  • to save an extra
  • 0%

BIT, POWER SCREWDRIVER
BIT, POWER SCREWDRIVER (1204)
p/n 1204
Closeout:$0.95
Qty
Bosch reinforced screwdriver bits are designed to handle tough torque applications
MAGNETIC PARTS TRAY, RECTANGULAR
MAGNETIC PARTS TRAY, RECTANGULAR (21263)
p/n 21263
Price:$15.95
Qty
Titan's rectangular magnetic parts trays should fit the bill for holding hardware, parts, and fasteners in place when the job is too big for a mini-size parts tray. These sturdy stainless steel magnetic parts trays will stick to any ferrous metal surface.
PUNCH AND DIE, WHITNEY
PUNCH AND DIE, WHITNEY (45PD-40)
p/n 45PD-40
Closeout:$11.95
Qty
Replacement punch and die for #45 hand punch. #40 size
PUNCH AND DIE, WHITNEY
PUNCH AND DIE, WHITNEY (45PD-5/32)
p/n 45PD-5/32
Closeout:$11.95
Qty
Replacement punch and die for #45 hand punch. 5/32" size
AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL
AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL (AMT-G3H)
p/n AMT-G3H
Closeout:$49.95
Qty
Dale Crane's AMT Series is the essential resource to pass the FAA Knowledge Exams for Aviation Maintenance. The General text covers the first section of the FAA’s required curriculum, incorporating an introduction to aviation.
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8")
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8) (HS-1/8)
p/n HS-1/8
Closeout:$22.95
Qty
1/8" High Shear & Huck Collar Splitter. Chisel type splitter is designed to remove the locking collars around High Shear and Huck locking rivets. 5-1/2" long. Compatible with all .401 shank rivet guns and hammers.
HAND RIVENUT TOOL
HAND RIVENUT TOOL (L845-1/4-20)
p/n L845-1/4-20
Price:$45.95
Qty
Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.
HAND RIVENUT TOOL
HAND RIVENUT TOOL (L845-1/4-28)
p/n L845-1/4-28
Price:$45.95
Qty
Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.
HAND RIVENUT TOOL
HAND RIVENUT TOOL (L845-10/24)
p/n L845-10/24
Price:$45.95
Qty
Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.
SAFETY WIRE KIT 6"
SAFETY WIRE KIT 6 (SWK-7)
p/n SWK-7
Price:$65.95
Qty
A money-saving kit from ATS. Included is our ATS 6” Safety Wire Twisters (6WA), the Hand Safety Wire Twister (134-8” long) for getting into those tight areas, quantity 3 1lb. cans of Safety Wire 302-25, 302-32, 302-41, and an 11" Canvas Tool Bag.
POWER RIVETER
POWER RIVETER (G84)
p/n G84
Price:$3,309.95
Qty
The G84 pneumatic-hydraulic tool is a heavy-duty production tool designed for high speed, reliable installation of the most popular sizes of aircraft Lockbolts. Its durable, all metal housing makes this tool ideal for use in rugged shop environments.
ELECTRONICS TECH KIT
ELECTRONICS TECH KIT (GT661)
p/n GT661
Price:$27.95
Qty
Electronics Tech Kit contains 32 tools selected to help DIYers disassemble, fix and reassemble handheld devices such as tablet computers, smartphones and video game consoles. Includes a precision aluminum screwdriver handle with a magnetic tip and 24 bl
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT) (SH-S1)
p/n SH-S1
Closeout:$25.95
Qty
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT) (SK-D6)
p/n SK-D6
Closeout:$39.95
Qty
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT) (SK-S6)
p/n SK-S6
Closeout:$38.95
Qty
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
KEYLESS 1/4" DRILL CHUCK
KEYLESS 1/4 DRILL CHUCK (T9888-KC)
p/n T9888-KC
Price:$34.95
Qty
Throw away those chuck keys! Step up to a keyless chuck and you'll never have to fumble through your toolbox again for a chuck key.
DRILL BIT 6" AIRCRAFT EXTENSION
DRILL BIT 6 AIRCRAFT EXTENSION (013-1)
p/n 013-1
Closeout:$3.95
Qty
#1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
SWAGER, HAND 3 WAY
SWAGER, HAND 3 WAY (0153FS)
p/n 0153FS
Price:$319.95
Qty
Eye, lap and stop sleeve splicing of cables diameter are made sure and easy with the new handswagers. Design features "over-center" leverage, which transmits a powerful snap-action to the final thrust of the jaws... assuring a tight, clean compression eve
REPLACEMENT BULB (STEELMAN 50101)
REPLACEMENT BULB (STEELMAN 50101) (05515)
p/n 05515
Closeout:$4.95
Qty
Replacement bulb for Steelman Inspector 50101
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004178)
p/n 1004178
Price:$209.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP100H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004209)
p/n 1004209
Price:$59.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP20H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004232)
p/n 1004232
Price:$74.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP40H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004243)
p/n 1004243
Price:$99.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP60H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004271)
p/n 1004271
Price:$273.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP300H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004275)
p/n 1004275
Price:$237.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP180H
STAINLESS STEEL ELMASONIC BASKET
STAINLESS STEEL ELMASONIC BASKET (1004277)
p/n 1004277
Price:$209.95
Qty
Baskets are almost universally used in an ultrasonic cleaning tank to hold parts being cleaned because the parts should not come in contact with the cleaning tank itself. For use with EP120H
CLECO CAP (3/16" - 10 PACK)
CLECO CAP (3/16 - 10 PACK) (10KSCAP-3/16)
p/n 10KSCAP-3/16
Closeout:$2.95
Qty
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Yellow color for 3/16" clecos.
CLECO CAP (5/32" - 10 PACK)
CLECO CAP (5/32 - 10 PACK) (10KSCAP-5/32)
p/n 10KSCAP-5/32
Closeout:$2.95
Qty
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Black color for 5/32" clecos.
BIT, POWER SCREWDRIVER
BIT, POWER SCREWDRIVER (1205)
p/n 1205
Closeout:$0.95
Qty
Bosch reinforced screwdriver bits are designed to handle tough torque applications
HANDSWAGING TOOL
HANDSWAGING TOOL (13SBHS)
p/n 13SBHS
Price:$195.95
Qty
This is a (4) cavity tool, swaging sleeve sizes 1/32", 3/64"and 1/16"copper and aluminum sleeves, and 3/32" copper sleeves plus 1/32" stainless steel sleeves. Ratchet mechanism will not release until swage is complete.

Related To Your Views