Closeout Specials

These great products are on special because we're phasing them out of our product line. They all carry a full warranty and we stand behind them 100%.

Order quickly because quanities are really, really limited.

1
CYLINDER BASE WRENCH (3/4) (2882-3/4)
CYLINDER BASE WRENCH (3/4")
P/N 2882-3/4
3/4" twelve-point wrench with 1/2" drive. Clearance height 13-1/4". Overall length 13-3/4". Fits most Continental engines, as well as the newer Lycoming engines.
Closeout:$10.00 Qty
2
CLECO CAP (3/16 - 10 PACK) (10KSCAP-3/16)
CLECO CAP (3/16" - 10 PACK)
P/N 10KSCAP-3/16
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Yellow color for 3/16" clecos.
Closeout:$2.95 Qty
3
CLECO CAP (5/32 - 10 PACK) (10KSCAP-5/32)
CLECO CAP (5/32" - 10 PACK)
P/N 10KSCAP-5/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Black color for 5/32" clecos.
Closeout:$2.95 Qty
4
NUT STARTER (8081)
NUT STARTER
P/N 8081
The Nut Starter is a convenient tool for installing or removing threaded nuts in hard-to-reach areas. It is also useful for installing nuts that are too small to be held by hand.
Closeout:$8.95 Qty
5
PISTON RING EXPANDER (2-3/4 to 4-1/4) (1941)
PISTON RING EXPANDER (2-3/4" to 4-1/4")
P/N 1941
A unique tool that will speed the removal and installation of piston rings with minimum ring distortion. The use of a ring expander will greatly reduce ring point misalignment which can be detrimental to good piston ring sealing and engine performance.
Closeout:$21.95 Qty
6
CRESCENT RAPIDWRENCH® (FR28SWMP)
CRESCENT RAPIDWRENCH®
P/N FR28SWMP
Crescent® Tools has come up with an interesting new twist on the crescent wrench. The new RapidWrench angles the jaws 90 degrees from the normal and places them on the torque axis for unparalleled versatility.
Closeout:$26.95 Qty
7
AIRCRAFT STRUCTURAL TECHNCIAN (ATB0908)
AIRCRAFT STRUCTURAL TECHNCIAN
P/N ATB0908
This book was written as an A&P college textbook for an in-depth course on metal airframe structures, but is also well suited and highly recommended for builders of metal kitplanes such as the Van's RV series.
Closeout:$32.95 Qty
8
CYCLO MICROFIBER PAD COVERS (SUEDE) (CY73-515)
CYCLO MICROFIBER PAD COVERS (SUEDE)
P/N CY73-515
An ultra-soft cover used for final touches. It effectively removes all surface residue without leaving any swirls or streaks. Excellent for cleanup after waxing. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$16.95 Qty
9
ALLEN® HEX KEY SET (EXTRA LONG) (56110)
ALLEN® HEX KEY SET (EXTRA LONG)
P/N 56110
Genuine Allen® brand hex wrenches are drop forged from tool steel and hardened for durability. 7 pieces in sizes: .050", 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", and 1/4". Extra long length (12").
Closeout:$24.95 Qty
10
CLECO CAP (3/32) (KSCAP-3/32)
CLECO CAP (3/32")
P/N KSCAP-3/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. White color for 3/32" clecos.
Closeout:$0.30 Qty
11
XCELITE® TERMINAL CRIMPER (RED/YELLOW/BLUE) (MAC2210)
XCELITE® TERMINAL CRIMPER (RED/YELLOW/BLUE)
P/N MAC2210
Xcelite crimpers are used throughout the aviation industry to install terminals and splices of all types. Full-cycle ratchet to ensure a complete crimp every time. Meets or exceeds UL® standards. For use with red/yellow/blue insulated terminals.
Closeout:$155.95 Qty
12
CYCLO COTTON PAD COVERS (CY73-550)
CYCLO COTTON PAD COVERS
P/N CY73-550
A 100% cotton terry cover. Perfect for cleaning interior surfaces and for buffing, polishing, and drying exterior surfaces. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$16.95 Qty
13
LEATHER TOOL HOLSTER (H13)
LEATHER TOOL HOLSTER
P/N H13
Manufactured from high quality top grain steer hide, and are extremely durable. They are correctly stitched and riveted to prevent the points of shears from penetrating.
Closeout:$15.95 Qty
14
NIGHT COM UV LED (51046)
NIGHT COM UV LED
P/N 51046
This flashlight produces 115 lumens on high and 50 lumens on low. Mode selection switch from high, low, LED, and safety. Runs up to 10 hours when using the UV LEDs. 1 meter impact resistance tested.
Closeout:$89.95 Qty
15
STREAMLIGHT® PROTAC HEADLIGHT (61304)
STREAMLIGHT® PROTAC HEADLIGHT
P/N 61304
Producing 540 lumens of light that reach 172 meters, this powerful device will surpass all others in your toolbox. With 90 degrees of tilting, your neck will not strain for the job required. Three lighting modes with a maximum of 36 hours of running time.
Closeout:$95.95 Qty
16
CLECO CAP (3/16) (KSCAP-3/16)
CLECO CAP (3/16")
P/N KSCAP-3/16
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Yellow color for 3/16" clecos.
Closeout:$0.30 Qty
17
DRILL BIT 6 AIRCRAFT EXTENSION (013-1)
DRILL BIT 6" AIRCRAFT EXTENSION
P/N 013-1
#1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
Closeout:$3.95 Qty
18
RATCHETING CRIMPER FOR NON-INSULATED TERMINALS (CP-353)
RATCHETING CRIMPER FOR NON-INSULATED TERMINALS
P/N CP-353
Save up to 35% energy with this new mechanism Ratchet Crimping Tool! The accurate crimping mold and self locking / releasing mechanical unit design ensure high crimping quality when crimping repeatedly.
Closeout:$55.95 Qty
19
HIGH SPEED PANEL SAW (ATS8512)
HIGH SPEED PANEL SAW
P/N ATS8512
High speed saw designed to quickly cut through hard materials such as composites, fiberglass, and ceramics. Includes diamond cutting wheel.
Closeout:$149.95 Qty
20
CLECO CAP (5/32) (KSCAP-5/32)
CLECO CAP (5/32")
P/N KSCAP-5/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Black color for 5/32" clecos.
Closeout:$0.30 Qty
21
MICRO-FINISHING SANDING DETAILER STD KIT COARSER (12303)
MICRO-FINISHING SANDING DETAILER STD KIT COARSER
P/N 12303
The Sanding Detailer is ideal for finishing those hard to reach areas. The abrasive belt can be indexed. The Sanding Detailer is spring loaded to put tension on the abrasive belt.
Closeout:$21.95 Qty
22
STREAMLIGHT PROTAC HL 3 (88047)
STREAMLIGHT PROTAC HL 3
P/N 88047
This powerful flashlight has C4 LED, with a 50,000 hour lifetime. Multi-function, push-button tactical tail switch allows for easy one-handed operations. Waterproof to 1 meter for 30 minutes; 1 meter impact resistance tested.
Closeout:$99.95 Qty
23
5 SERRATED NEEDLE-NOSE PLIERS (E100-011)
5" SERRATED NEEDLE-NOSE PLIERS
P/N E100-011
These Serrated Needle Nose are stainless steel with mirror polished finish that prevents flaking and corrosion. The leaf springs are spot welded to the tool handles to fix the jaws in a comfortable position.
Closeout:$15.95 Qty
24
DUPLICATING/TRANSFER PUNCH (TP-5/32)
DUPLICATING/TRANSFER PUNCH
P/N TP-5/32
5/32" diameter. Used to mark overlapping holes and for locating or aligning holes. Overall length 3-1/2"
Price:$6.95 Qty
25
AIR FILE, ATS (ATS5095)
AIR FILE, ATS
P/N ATS5095
If you do a lot of filing, then this is the tool for you. It takes the pain and drudgery out of filing by putting air power to work for you. Just press a the control button and this tool automatically files away at over 3,000 strokes.
Closeout:$95.95 Qty
26
CYCLO FOAM BONNETS (GREEN) (CY71-120)
CYCLO FOAM BONNETS (GREEN)
P/N CY71-120
A more aggressive pad than the White Finishing Pad. The pore density makes it perfect for polishing and for removing light oxidation. Leaves a stunning shine. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$14.95 Qty
27
CYCLO MICROFIBER PAD COVERS (TERRY) (CY73-530)
CYCLO MICROFIBER PAD COVERS (TERRY)
P/N CY73-530
The preferred cover for applying polish and buffing wax. Its hooked fibers remove surface residue effectively while leaving a high-gloss finish. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$16.95 Qty
28
BIT, POWER SCREWDRIVER (1204)
BIT, POWER SCREWDRIVER
P/N 1204
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
29
BIT, POWER SCREWDRIVER (1205)
BIT, POWER SCREWDRIVER
P/N 1205
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
30
SCOTCH-BRITE HAND PADS (HEAVY DUTY) (7440B)
SCOTCH-BRITE HAND PADS (HEAVY DUTY)
P/N 7440B
Heavy duty (tan) pads are very aggressive. A high mineral content makes these pads cut fast to remove contaminants and oxides. Recommended for corrosion removal jobs. Each box contains ten (10) 6"x9" pads. Manufactured by 3M
Closeout:$39.95 Qty
31
PUNCH AND DIE, WHITNEY (45PD-21)
PUNCH AND DIE, WHITNEY
P/N 45PD-21
Replacement punch and die for #45 hand punch. #21 size
Closeout:$11.95 Qty
32
LARGE COMMA, WEDGE DOLLY (55112)
LARGE COMMA, WEDGE DOLLY
P/N 55112
Use behind brackets, braces, and other reinforcements. 6"L x 2-5/8"W x 2"H, Wt. 3-3/4 lbs.
Closeout:$48.95 Qty
33
STREAMLIGHT STINGER® CLASSIC LED FLASHLIGHT (75663)
STREAMLIGHT STINGER® CLASSIC LED FLASHLIGHT
P/N 75663
The Stinger Classic LED features a custom optic design which provides a smooth beam with optimal peripheral illumination; optimized electronics provide regulated intensity throughout battery charge. Three modes and strobe. Waterproof and impact resistant.
Closeout:$149.95 Qty
34
PRECISION DRILL CHUCK (1/4) (T7888-SPC)
PRECISION DRILL CHUCK (1/4")
P/N T7888-SPC
Precision Jacobs® brand chuck features the utmost in quality. It's a balanced chuck with precision-ground jaws that stays centered to minimize wobble.
Closeout:$49.95 Qty
35
CYCLO FOAM BONNETS (WHITE) (CY71-110)
CYCLO FOAM BONNETS (WHITE)
P/N CY71-110
This superfine pad is used in final buffing, after polishing with other pads. It's excellent for applying sealants and buffing out wax. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$14.95 Qty
36
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8) (HS-1/8)
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8")
P/N HS-1/8
1/8" High Shear & Huck Collar Splitter. Chisel type splitter is designed to remove the locking collars around High Shear and Huck locking rivets. 5-1/2" long. Compatible with all .401 shank rivet guns and hammers.
Closeout:$22.95 Qty
37
BENT KEVLAR SHEARS  (8) (18425)
BENT KEVLAR SHEARS (8")
P/N 18425
Specially designed to cut Kevlar® materials. Also excellent for cutting plastic, canvas, upholstery and more. Micro-serrated blades for true grip & cut performance. 8 inch steel blades for industrial strength.
Closeout:$34.95 Qty
38
PUNCH AND DIE, WHITNEY (45PD-5/32)
PUNCH AND DIE, WHITNEY
P/N 45PD-5/32
Replacement punch and die for #45 hand punch. 5/32" size
Closeout:$11.95 Qty
39
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT) (SK-S6)
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
P/N SK-S6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$38.95 Qty
40
REPLACEMENT BULB (STEELMAN 50101) (05515)
REPLACEMENT BULB (STEELMAN 50101)
P/N 05515
Replacement bulb for Steelman Inspector 50101
Closeout:$4.95 Qty
41
PUNCH AND DIE, WHITNEY (45PD-12)
PUNCH AND DIE, WHITNEY
P/N 45PD-12
Replacement punch and die for #45 hand punch. #12 size.
Closeout:$11.95 Qty
42
PUNCH AND DIE, WHITNEY (45PD-40)
PUNCH AND DIE, WHITNEY
P/N 45PD-40
Replacement punch and die for #45 hand punch. #40 size
Closeout:$11.95 Qty
43
LARGE TOE DOLLY (55108)
LARGE TOE DOLLY
P/N 55108
Flat and low-crown curved faces for dinging flat surfaces. 7"L x 2-3/8"W x 2"H. Wt. 2 lbs.
Closeout:$38.95 Qty
44
STREAMLIGHT STRION® HL LED FLASHLIGHT (74751)
STREAMLIGHT STRION® HL LED FLASHLIGHT
P/N 74751
Multi-function on/off push-button tail switch lets you choose three lightning modes and strobe. Lithium ion battery is rechargeable up to 1000 times; fully recharges in 3 hours. 6000 series machined aircraft aluminum with anodized finish.
Closeout:$145.95 Qty
45
OIL & FILTER ANALYSIS KIT (AVL-GA-M)
OIL & FILTER ANALYSIS KIT
P/N AVL-GA-M
Analyse the debris found in your oil filter.
Closeout:$59.95 Qty
46
CYCLO FOAM BONNETS (YELLOW) (CY71-135)
CYCLO FOAM BONNETS (YELLOW)
P/N CY71-135
A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$15.95 Qty
47
CYCLO FOAM BONNETS (ORANGE) (CY71-145)
CYCLO FOAM BONNETS (ORANGE)
P/N CY71-145
An exceptional, all-in-one cleaning and polishing pad. This high density pad has the power to remove light scratches and to polish. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$15.95 Qty
48
CYCLO ORITBAL POLISHER (BONNET HEADS) (CYCLO5)
CYCLO ORITBAL POLISHER (BONNET HEADS)
P/N CYCLO5
For use with Bonnet Heads. 115v electric, 2800 rpm at 1/3 hp. Developed for the aircraft industry, the Cyclo Wonder Tool is government approved for the high exacting demands of cleaning and polishing missiles and aircraft - even supersonic jets.
Closeout:$319.95 Qty
49
CYCLO ORBITAL POLISHER  (HOOK & LOOP) PRO (CYCLO5-RPH-PRO)
CYCLO ORBITAL POLISHER (HOOK & LOOP) PRO
P/N CYCLO5-RPH-PRO
The Model 5-Pro, Mark II is a variable speed version of the Model 5 and also offers extended 3 year warranty and all the balancing weights (blue, yellow and silver).
Closeout:$385.95 Qty
50
VISOR-LIGHT (OPTIVISOR® ACCESSORY) (DLT-06)
VISOR-LIGHT (OPTIVISOR® ACCESSORY)
P/N DLT-06
VisorLight is a handy, high intensity, light that clips on to your OptiVisor® Magnifier to bring more illumination to the work or inspection area. Powerful Hands Free Xenon Light (6000 Candle Power). 5 To 6 Hours Battery Life.
Closeout:$26.95 Qty
51
LIGHTNING DETECTOR, DELUXE (LD50)
LIGHTNING DETECTOR, DELUXE
P/N LD50
This portable and ground-based unit comes in a rugger, weather-resistant plastic case and is more powerful that other units and will detect storms within 40 miles but will start detecting thunderstorms up to 70 miles away.
Closeout:$299.95 Qty
52
LIGHTNING DETECTOR (LD7)
LIGHTNING DETECTOR
P/N LD7
Ideal for early storm warnings, storm directions and protection for any outdoor activity.
Closeout:$67.95 Qty
53
9 CRIMPING WIRE CUTTING STEEL PLIERS (PM-924)
9" CRIMPING WIRE CUTTING STEEL PLIERS
P/N PM-924
The 9" Steel Wire Cutting Crimping Pliers has a high quality SCM 440 hot-riveted design that features smooth wobble-free operation. It's High-Leverage design provides greater cutting and gripping power.
Closeout:$23.95 Qty
54
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT) (SH-S1)
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
P/N SH-S1
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$25.95 Qty
55
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT) (SK-D6)
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
P/N SK-D6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$39.95 Qty
56
BULB, HALAGEN FOR VO SCOPES (VO-1)
BULB, HALAGEN FOR VO SCOPES
P/N VO-1
Halagen bulb for Vo-Scope
Closeout:$12.95 Qty
57
MAGNAFLUX® BLACKLIGHT (100 WATT) (ZB-23A)
MAGNAFLUX® BLACKLIGHT (100 WATT)
P/N ZB-23A
100 watt Black Light for the Magnaflux Zyglo tester. Very high intensity short-wave ultraviolet (UV) light used to illuminate Magnaflux Zyglo and other dies that will fluoresce under black light. Includes transformer and power control unit.
Closeout:$1,245.95 Qty