Closeout Specials

These great products are on special because we're phasing them out of our product line. They all carry a full warranty and we stand behind them 100%.

Order quickly because quanities are really, really limited.

CHEMICAL TACK CLOTH BLACK
P/N CT60B
Our Chemical Cloth tack cloth is the top tack cloth in the marketplace. It is the tack cloth of choice in the Aerospace Industry and was designed specifically for that industry.
Closeout:$1.75 Qty
CLECO CAP (3/32")
P/N KSCAP-3/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. White color for 3/32" clecos.
Closeout:$0.25 Qty
NUT PLATE BLOCK, 8-32
P/N CA-NPB8
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
PISTON RING EXPANDER (2-3/4" to 4-1/4")
P/N 1941
A unique tool that will speed the removal and installation of piston rings with minimum ring distortion. The use of a ring expander will greatly reduce ring point misalignment which can be detrimental to good piston ring sealing and engine performance.
Closeout:$21.95 Qty
NUT PLATE BLOCK 10-32
P/N CA-NPB10
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
CLECO CAP (3/16")
P/N KSCAP-3/16
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Yellow color for 3/16" clecos.
Closeout:$0.25 Qty
CLECO CAP (5/32")
P/N KSCAP-5/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Black color for 5/32" clecos.
Closeout:$0.25 Qty
C-RIVET SET (FRAME ONLY)
P/N CSET
Innovative C-Rivet Set bends around obstacles and allows you to reach into awkward areas for riveting. Designed to work like the industry standard "gooseneck" style rivet sets. This product is the C-FRAME only.
Closeout:$26.95 Qty
OIL FILTER MEDIA CUTTER
P/N FMC-2000
This innovative new Oil Filter Media Cutter allows the filter media to be cut, removed and analyzed in a very neat and orderly fashion.
Closeout:$351.95 Qty
CYCLO FOAM BONNETS (WHITE)
P/N CY71-110
This superfine pad is used in final buffing, after polishing with other pads. It's excellent for applying sealants and buffing out wax. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$10.95 Qty
RATCHETING CRIMPER FOR NON-INSULATED TERMINALS
P/N CP-353
Save up to 35% energy with this new mechanism Ratchet Crimping Tool! The accurate crimping mold and self locking / releasing mechanical unit design ensure high crimping quality when crimping repeatedly.
Closeout:$55.95 Qty
CYCLO FOAM BONNETS (YELLOW)
P/N CY71-135
A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$11.95 Qty
HIGH SPEED PANEL SAW
P/N ATS8512
High speed saw designed to quickly cut through hard materials such as composites, fiberglass, and ceramics. Includes diamond cutting wheel.
Closeout:$139.95 Qty
NUTPLATE BLOCK, 4-10
P/N CA-NPB4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
OIL & FILTER ANALYSIS KIT
P/N AVL-GA-M
Analyse the debris found in your oil filter.
Closeout:$59.95 Qty
SCOTCH-BRITE HAND PADS (HEAVY DUTY)
P/N 7440B
Heavy duty (tan) pads are very aggressive. A high mineral content makes these pads cut fast to remove contaminants and oxides. Recommended for corrosion removal jobs. Each box contains ten (10) 6"x9" pads. Manufactured by 3M
Closeout:$39.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-21
Replacement punch and die for #45 hand punch. #21 size
Closeout:$11.95 Qty
COTTON SWABS
P/N 568186
Single tip non-sterile applicators are highly absorbent and compatible with all cleaning solvents. They are manufactured with 100% USP bleached cotton, on a 6" sturdy wooden stick for extra support during cleaning delicate parts.
Closeout:$9.95 Qty
CYCLO FOAM BONNETS (ORANGE)
P/N CY71-145
An exceptional, all-in-one cleaning and polishing pad. This high density pad has the power to remove light scratches and to polish. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
Closeout:$11.95 Qty
9" CRIMPING WIRE CUTTING STEEL PLIERS
P/N PM-924
The 9" Steel Wire Cutting Crimping Pliers has a high quality SCM 440 hot-riveted design that features smooth wobble-free operation. It's High-Leverage design provides greater cutting and gripping power.
Closeout:$23.95 Qty
BIT, POWER SCREWDRIVER
P/N 1204
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-40
Replacement punch and die for #45 hand punch. #40 size
Closeout:$11.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-5/32
Replacement punch and die for #45 hand punch. 5/32" size
Closeout:$11.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL
P/N AMT-G3H
Dale Crane's AMT Series is the essential resource to pass the FAA Knowledge Exams for Aviation Maintenance. The General text covers the first section of the FAA’s required curriculum, incorporating an introduction to aviation.
Closeout:$49.95 Qty
HIGH SHEAR AND HUCK COLLAR SPLITTER (1/8")
P/N HS-1/8
1/8" High Shear & Huck Collar Splitter. Chisel type splitter is designed to remove the locking collars around High Shear and Huck locking rivets. 5-1/2" long. Compatible with all .401 shank rivet guns and hammers.
Closeout:$22.95 Qty
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
P/N SH-S1
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$25.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
P/N SK-D6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$39.95 Qty
CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
P/N SK-S6
5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
Closeout:$38.95 Qty
DRILL BIT 6" AIRCRAFT EXTENSION
P/N 013-1
#1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
Closeout:$3.95 Qty
REPLACEMENT BULB (STEELMAN 50101)
P/N 05515
Replacement bulb for Steelman Inspector 50101
Closeout:$4.95 Qty
CLECO CAP (3/16" - 10 PACK)
P/N 10KSCAP-3/16
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Yellow color for 3/16" clecos.
Closeout:$2.95 Qty
CLECO CAP (5/32" - 10 PACK)
P/N 10KSCAP-5/32
Vinyl cleco cap slips over the end of standard spring-loaded (K, KHD, or KK series) clecos and prevents damage the skin. Can be reused many times over and cleans off easily with soap and water. Package of 10 pieces. Black color for 5/32" clecos.
Closeout:$2.95 Qty
BIT, POWER SCREWDRIVER
P/N 1205
Bosch reinforced screwdriver bits are designed to handle tough torque applications
Closeout:$0.95 Qty
PUNCH AND DIE, WHITNEY
P/N 45PD-12
Replacement punch and die for #45 hand punch. #12 size.
Closeout:$11.95 Qty
NIGHT COM UV LED
P/N 51046
This flashlight produces 115 lumens on high and 50 lumens on low. Mode selection switch from high, low, LED, and safety. Runs up to 10 hours when using the UV LEDs. 1 meter impact resistance tested.
Closeout:$89.95 Qty
PUREWIPE SPONGE/PAD
P/N 582562F
These 4" x 4" sponges are made from 100% cotton woven gauze.
Closeout:$12.95 Qty
PUREWIPE CHEESECLOTH
P/N 588039C
Made from 100% woven cotton, our cheesecloth is very soft and absorbent. The openness of the weave assures the user that the wiping cloth will not displace the contaminants on the surface.
Closeout:$45.95 Qty
AEROTEX
P/N 588975T
This bleached crimped wiping cloth is manufactured from 100% cotton. Its unique finish is ideal for use whenever a wiping or polishing cloth is needed.
Closeout:$14.95 Qty
STREAMLIGHT® PROTAC HEADLIGHT
P/N 61304
Producing 540 lumens of light that reach 172 meters, this powerful device will surpass all others in your toolbox. With 90 degrees of tilting, your neck will not strain for the job required. Three lighting modes with a maximum of 36 hours of running time.
Closeout:$75.95 Qty
GREIDER TACK CLOTH
P/N 700844
This premium silicone-free tack cloth is the product of choice in certain painting applications. It is the product of choice for electronics manufacturers. It is an outstanding clean room tack cloth.
Closeout:$99.95 Qty
STREAMLIGHT STRION® HL LED FLASHLIGHT
P/N 74751
Multi-function on/off push-button tail switch lets you choose three lightning modes and strobe. Lithium ion battery is rechargeable up to 1000 times; fully recharges in 3 hours. 6000 series machined aircraft aluminum with anodized finish.
Closeout:$135.95 Qty
STREAMLIGHT STINGER® CLASSIC LED FLASHLIGHT
P/N 75663
The Stinger Classic LED features a custom optic design which provides a smooth beam with optimal peripheral illumination; optimized electronics provide regulated intensity throughout battery charge. Three modes and strobe. Waterproof and impact resistant.
Closeout:$135.95 Qty
RYMPLECLOTH
P/N 780332
Manufactured with 100% purified woven cotton, it’s unique crimped finish and firmly twisted yarns lift, entrap and remove particulates and, residual surface contamination.
Closeout:$13.95 Qty
STREAMLIGHT PROTAC HL 3
P/N 88047
This powerful flashlight has C4 LED, with a 50,000 hour lifetime. Multi-function, push-button tactical tail switch allows for easy one-handed operations. Waterproof to 1 meter for 30 minutes; 1 meter impact resistance tested.
Closeout:$89.95 Qty
NONWOVEN PUREWIPE
P/N 992130
Your plane can get so dirty and full of unwanted substances that it may just start to look sickly. Whatever ails your aircraft in terms of soiled surfaces can be cured with American Fiber's Purewipe Cleaning Cloths.
Closeout:$6.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: POWERPLANT
P/N AMT-P3
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Powerplant details the technical maintenance of turbine and reciprocating engines.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: STRUCTURES
P/N AMT-STRUC-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Airframe: Structures details the subjects associated with aircraft structures as they relate to the landing gear.
Closeout:$49.95 Qty
AVIATION MAINTENANCE TECHNICIAN SERIES: SYSTEMS
P/N AMT-SYS-3H
The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Systems covers the various systems involved with the airframe.
Closeout:$49.95 Qty
AMT HANDBOOK: AIRFRAME, VOLUME 1
P/N ASA-8083-31V1
This new FAA AMT Handbook—Airframe Volume 1 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
Closeout:$30.95 Qty
AMT HANDBOOK: AIRFRAME, VOLUME 2
P/N ASA-8083-31V2
This new FAA AMT Handbook—Airframe Volume 2 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
Closeout:$30.95 Qty
AMT HANDBOOK: POWERPLANT (VOL 1 & 2)
P/N ASA-8083-32
FAA handbook provides knowledge for earning the Aviation Maintenance Technician certificate, Powerplant section. The FAA General test questions are drawn from this book (FAA-H-8083-32).
Closeout:$30.95 Qty
ESSENTIALS OF ADVANCED COMPOSITE FABRICATION & REPAIR
P/N ASA-COMPOSITE
Full-color illustrated textbook covers everything you need to know for working with advanced composite materials.
Closeout:$79.95 Qty
NUTPLATE BLOCK, 1/4-20
P/N CA-NPB-1/4
The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
Closeout:$25.95 Qty
CYCLO MICROFIBER PAD COVERS (SUEDE)
P/N CY73-515
An ultra-soft cover used for final touches. It effectively removes all surface residue without leaving any swirls or streaks. Excellent for cleanup after waxing. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$16.95 Qty
CYCLO MICROFIBER PAD COVERS (TERRY)
P/N CY73-530
The preferred cover for applying polish and buffing wax. Its hooked fibers remove surface residue effectively while leaving a high-gloss finish. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$12.95 Qty
CYCLO COTTON PAD COVERS
P/N CY73-550
A 100% cotton terry cover. Perfect for cleaning interior surfaces and for buffing, polishing, and drying exterior surfaces. Can be used with any CYCLO Polisher configuration. 4 covers per package.
Closeout:$12.95 Qty
AIRCRAFT GAS TURBINE POWERPLANTS
P/N EA-TEP-2
Book, Aircraft Gas Turbine Powerplants. The most up-to-date information on aircraft gas turbine powerplants available. New edition features over 450 pages and 500 illustrations.
Closeout:$65.95 Qty
FAR AERONAUTICAL INFORMATION MANUAL (FAR/AIM)
P/N FAR-AIM
Federal Aviation Regulations / Aeronautical Information Manual (FAR/AIM). Regulations for General Aviation, Sport Pilots, & Instructors.
Closeout:$17.95 Qty
LIGHTNING DETECTOR, DELUXE
P/N LD50
This portable and ground-based unit comes in a rugger, weather-resistant plastic case and is more powerful that other units and will detect storms within 40 miles but will start detecting thunderstorms up to 70 miles away.
Closeout:$259.95 Qty
LIGHTNING DETECTOR
P/N LD7
Ideal for early storm warnings, storm directions and protection for any outdoor activity.
Closeout:$61.95 Qty
DUPLICATING/TRANSFER PUNCH
P/N TP-5/32
5/32" diameter. Used to mark overlapping holes and for locating or aligning holes. Overall length 3-1/2"
Price:$6.95 Qty
BULB, HALAGEN FOR VO SCOPES
P/N VO-1
Halagen bulb for Vo-Scope
Closeout:$12.95 Qty
MAGNAFLUX® BLACKLIGHT (100 WATT)
P/N ZB-23A
100 watt Black Light for the Magnaflux Zyglo tester. Very high intensity short-wave ultraviolet (UV) light used to illuminate Magnaflux Zyglo and other dies that will fluoresce under black light. Includes transformer and power control unit.
Closeout:$995.95 Qty