• Use Promo
  • in the next
  • 00:00:00
  • to save an extra
  • 0%

SPARK PLUG UNGAPPER TOOL
SPARK PLUG UNGAPPER TOOL (SPGE1)
p/n SPGE1
Price:$39.95
Qty
There are literally hundreds of tools out there to close a spark plug gap. But what happens when your over-gap a plug and need to undo it? That's where this handy tool comes in: Our new Spark Plug UnGapping tool will let you safely and precisely expand th
UNIVERSAL HEAD RIVET ASSORTMENT PACK (MS20470AD)
UNIVERSAL HEAD RIVET ASSORTMENT PACK (MS20470AD) (MS20470AD-PK)
p/n MS20470AD-PK
Price:$34.95
Qty
An assortment of MS20470AD Universal Head rivets in the four most commonly used sizes and lengths.
CYLINDER BASE NUT WRENCH SET
CYLINDER BASE NUT WRENCH SET (3882-5)
p/n 3882-5
Price:$135.95
Qty
New 3882-series Cylinder Base Nut Wrenches feature a 12-point thin-walled hex head, and a 15" span for use with any Continental and newer Lycoming engines.
FLUSH RIVET ASSORTMENT PACK (MS20426AD)
FLUSH RIVET ASSORTMENT PACK (MS20426AD) (MS20426AD-PK)
p/n MS20426AD-PK
Price:$35.95
Qty
An assortment of MS20426AD Flush Head rivets in the four most commonly used sizes and lengths.
WIRE HARNESS SPOON
WIRE HARNESS SPOON (M35250)
p/n M35250
Price:$9.95
Qty
No avionics installer should be without this tool. This handy tool makes the job of inserting a new wire into an already tied off wire bundle much easier. This tool is a great time saver.
AVIATION GRADE TERMINAL CRIMP KIT
AVIATION GRADE TERMINAL CRIMP KIT (AVT500K)
p/n AVT500K
Price:$99.95
Qty
Aviation grade terminal crimp kit includes ratcheting crimper plus an assortment of Molex AviKrimp ring terminals, and AMP PIDG butt splices packaged in a custom case.
6" STRAP DUPLICATOR (#30)
6 STRAP DUPLICATOR (#30) (62)
p/n 62
Price:$11.95
Qty
Size #30. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.
AVIATION GRADE TERMINAL PACK
AVIATION GRADE TERMINAL PACK (AVT-RK)
p/n AVT-RK
Price:$49.95
Qty
A generous assortment of Molex AviKrimp® and AMP PIDG® aviation grade terminals and splices to take on any electrical repair job. Also includes a compartment case.
FLUSH RIVET ASSORTMENT (NAS1097AD)
FLUSH RIVET ASSORTMENT (NAS1097AD) (NAS1097AD-KIT)
p/n NAS1097AD-KIT
Price:$21.95
Qty
NAS1097AD Flush Shear Rivet ("oops rivets") assortment of 3/32" and 1/8" diameter rivets in six (3) most commonly used lengths.
BOELUBE® PASTE (4OZ MEDIUM BLUE)
BOELUBE® PASTE (4OZ MEDIUM BLUE) (BL70307L)
p/n BL70307L
Price:$11.95
Qty
4oz Medium Paste. Boelube® is a specially formulated lubricant patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades, taps & dies, boring tools, and any other application where smooth cutting action is required.
BOELUBE® STICK, 1.6OZ
BOELUBE® STICK, 1.6OZ (BL70200-13)
p/n BL70200-13
Price:$4.95
Qty
Boelube® is a lubricant formulated and patented by Boeing Aerospace. Use it on drill bits, reamers, saw blades and any other application where smooth cutting is required. A small amount will greatly improve tool life. 1.6oz pushup stick.
6" STRAP DUPLICATOR (#40)
6 STRAP DUPLICATOR (#40) (61)
p/n 61
Price:$11.95
Qty
Size #40. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.
ATS PRO PALM DRILL (2600 RPM)
ATS PRO PALM DRILL (2600 RPM) (ATS61100)
p/n ATS61100
Price:$139.95
Qty
Our new Pro Palm Drill is only 7” long and features a True Variable Speed Control trigger for very precise speed control. 2600 RPM.
AUTOMATIC CENTER PUNCH
AUTOMATIC CENTER PUNCH (001A)
p/n 001A
Price:$8.95
Qty

Spring loaded. Alloy hardened steel tip

6" STRAP DUPLICATOR (#21)
6 STRAP DUPLICATOR (#21) (63)
p/n 63
Price:$11.95
Qty
Size #21. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.
SCRAPER SET,NYLON 4PC
 SCRAPER SET,NYLON  4PC (11565)
p/n 11565
Price:$13.95
Qty
Titan 4-piece nylon scraper sets are designed to gently but effectively scrape and remove decals, emblems, body moldings, gaskets, and debris without damaging surfaces. These scrapers are made from a durable nylon plastic material that absorbs hammer blow
6" STRAP DUPLICATOR (#12)
6 STRAP DUPLICATOR (#12) (65)
p/n 65
Price:$11.95
Qty
Size #12. 6" working length. Drill bushing type (most commonly ordered series). for drilling duplicate matching holes in overlapping sheets. Drill Guide Duplicators lets you drill directly by using the duplicator as a drill guide.
ELEVATOR RV-14 BUCKING BAR
ELEVATOR RV-14 BUCKING BAR (AE630)
p/n AE630
Price:$39.95
Qty
This specially designed bucking bar is required on the Van's Aircraft RV-10 and RV-14 for riveting inside the elevators. The bar dimensions are call out in the RV builders plans pages 9-12 of the control surface section.
GROMMET STRETCHER
GROMMET STRETCHER (BO-05M-GS)
p/n BO-05M-GS
Price:$37.95
Qty
Stop cutting your grommets to get them over fittings and plugs, use Bogert Aviation's Grommet Stretcher. Using the Grommet Stretcher is 2-3x's faster when stretching grommets over fittings and plugs.
BACK RIVETING RIVET SET
BACK RIVETING RIVET SET (AE4595)
p/n AE4595
Price:$32.95
Qty
Superior for back riveting flush rivets without damage to the skin surface. Spring loaded plastic guard holds down skin while riveting. Can also be used for "straight" riveting of flush rivets. Made in U.S.A.
SCREWDRIVER, RATCHETING 18" 12PC
SCREWDRIVER, RATCHETING 18 12PC (12218)
p/n 12218
Price:$19.95
Qty
18in. ratcheting driver with 10 bit choices and 250 in.-lbs. of torque gives you fastening capabilities like no other handheld driver — especially in hard-to-reach areas.
SOLDERING HELPING HANDS W/LED
SOLDERING HELPING HANDS W/LED (SN-396)
p/n SN-396
Price:$34.95
Qty
The lighted magnifier is on a flexible neck that gives you 2.5X(6D) and 4X(12D) magnification. The 3 adjustable helping hands clips allow for precise positioning and secure grip on your work.
AUTOMATIC CENTER PUNCH
AUTOMATIC CENTER PUNCH (E900-158)
p/n E900-158
Price:$9.95
Qty
Used for repetitive punching or riveting action. Adjustable for light or heavy impact. Enlarged plastic handle for impact cushioning.
CHEMICAL TACK CLOTH BLACK
CHEMICAL TACK CLOTH  BLACK (CT60B)
p/n CT60B
Closeout:$1.75
Qty
Our Chemical Cloth tack cloth is the top tack cloth in the marketplace. It is the tack cloth of choice in the Aerospace Industry and was designed specifically for that industry.
RING TERMINAL 18-22AWG, #8 POST (25 EA)
RING TERMINAL 18-22AWG, #8 POST (25 EA) (AVT1822R-8K)
p/n AVT1822R-8K
Price:$7.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 18-22 AWG (red) single and multi-strand wires. #8 post eyelet size. 25 pieces per package.
ARTICULATING FLEXIBLE USB BORESCOPE
ARTICULATING FLEXIBLE USB BORESCOPE (VA-980)
p/n VA-980
Price:$399.95
Qty
The VA-980 USB Borescope is a 8.5mm diameter by .8 meter long semi-rigid videoscope which can be molded by hand into various shapes. The probe will retain its shape, thus enabling you to go around corners and obstacles when performing inspections.
TEMPEST EZ DRAIN TOOL
TEMPEST EZ DRAIN TOOL (AA473)
p/n AA473
Price:$45.95
Qty
The Tempest Easy Drain Oil Filter Drain Tool eliminates the most time-consuming aspect of an oil change - the clean up. Easy Drain reduces filter spills, saving time and eliminating the seemingly inevitable mess of changing oil.
BUTT SPLICE 18-22AWG (10 PACK)
BUTT SPLICE 18-22AWG (10 PACK) (AVT1822BSK)
p/n AVT1822BSK
Price:$8.95
Qty
AMP PIDG® Electrical Butt Splice meets AS/SAE AS7928, Type II, Class 1 and 2 standards for aerospace electrical connections. For 18-22 AWG (red) single and multi-strand wires. 10 pieces per package.
ATS PRO HIGH SPEED PALM DRILL
ATS PRO HIGH SPEED PALM DRILL (ATS6100B)
p/n ATS6100B
Price:$119.95
Qty
High speed 4500 RPM Palm Drill cuts cleanly though aluminum, composites, and even tough metals such as Titanium.
MINIATURE 1/8" DRILL CHUCK
MINIATURE 1/8 DRILL CHUCK (T9750-C)
p/n T9750-C
Price:$36.95
Qty
Miniature chuck is less than an inch in diameter and features as 1/4-28 thread to mount mounts directly to your Angle Drill or attachment.

Related To Your Views