• Use Promo
  • in the next
  • 00:00:00
  • to save an extra
  • 0%

KNIPEX, XL PLIERS WRENCH 16"
KNIPEX, XL PLIERS WRENCH 16 (8603400)
p/n 8603400
Price:$149.95
Qty
A one-of-a-kind tool with unlimited possibilities, the patented, easy-to-use Knipex pliers wrench is a fantastic tool for fastening, gripping, holding, and bending. Its slim profile allows easy access to confine
RING TERMINAL 18-22AWG, 1/4" POST (25 EA)
RING TERMINAL 18-22AWG, 1/4 POST (25 EA) (AVT1822R-1/4K)
p/n AVT1822R-1/4K
Price:$7.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 18-22 AWG (red) single and multi-strand wires. 1/4" post eyelet size. 25 pieces per package.
PROPANE HEAT GUN
PROPANE HEAT GUN (51886)
p/n 51886
Price:$75.95
Qty
This propane heat gun is perfect for use with wiring and paint removal projects. Its high temperature range makes it a great tool for thawing frozen pipes and bending plastics.
AVERY 1-1/2" HAND RIVET SQUEEZER
AVERY 1-1/2 HAND RIVET SQUEEZER (AE9415)
p/n AE9415
Price:$299.95
Qty
In 1993 Avery Tools pioneered and developed the unique design of the first hand rivet squeezer that had inter-changeability between the yokes for pneumatic squeezers. The squeezer comes with two quick release pins for faster and easier yoke changes, and h
SUPERBIRD DIRT, GRIME&STREAK REMOVER
SUPERBIRD DIRT, GRIME&STREAK REMOVER (SB-REMOVER)
p/n SB-REMOVER
Price:$14.95
Qty
Superbird dirt, grime and streak remover quickly removes dirt, grime and black streaks with very little scrubbing or effort—just spray on and wipe off! It immediately begins working to penetrate and lift away dirt, grime and black streaks upon contact, ma
HAND RIVENUT TOOL
HAND RIVENUT TOOL (L845-6/32)
p/n L845-6/32
Price:$45.95
Qty
Unit is simple to use and an efficient means for installing rivenuts. Unit comes with allen wrench.
PUNCH AND DIE, WHITNEY
PUNCH AND DIE, WHITNEY (45PD-40)
p/n 45PD-40
Closeout:$11.95
Qty
Replacement punch and die for #45 hand punch. #40 size
RING TERMINAL 10-12AWG, 5/16" POST (25 EA)
RING TERMINAL 10-12AWG, 5/16 POST (25 EA) (AVT1012R-5/16K)
p/n AVT1012R-5/16K
Price:$11.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 10-12 AWG (Yellow) single and multi-strand wires. 5/16" post eyelet size. 25 pieces per package.
PRESSURIZED STRUT FILLER
PRESSURIZED STRUT FILLER (BO-16M-PSF)
p/n BO-16M-PSF
Price:$925.95
Qty
Finally a real time and money saver! This tool changes the way landing gear struts are serviced. No longer do you have to put an aircraft up on jacks to add fluid to and fill Oleo type landing gear. This is a totally clean and safe process.
6PC SET HOLLOW STEEL PUNCH
6PC SET HOLLOW STEEL PUNCH (GT1280ST)
p/n GT1280ST
Price:$42.95
Qty
Six-piece Hollow Steel Punch Set offers punches made of durable forged steel with a side clearance hole for rapid punching without clogging the work surface. The punched material simply slides through the body of the tool for effortless disposal.
3K FORCE HYDRAULIC SQUEEZER SYSTEM W/1.5" YOKE
3K FORCE HYDRAULIC SQUEEZER SYSTEM W/1.5 YOKE (HTS-C3K15)
p/n HTS-C3K15
Price:$769.95
Qty
The Numatx squeezer is smaller and lighter than comparable pneumatic-only units and delivers constant force through the full stroke of the tool, meaning that you can set different lengths of rivets without stopping to change settings.
3K FORCE HYDRAULIC SQUEEZER SYSTEM W/4 YOKE
3K FORCE HYDRAULIC SQUEEZER SYSTEM W/4 YOKE (HTS-C3K4)
p/n HTS-C3K4
Price:$833.95
Qty
The Numatx squeezer is smaller and lighter than comparable pneumatic-only units and delivers constant force through the full stroke of the tool, meaning that you can set different lengths of rivets without stopping to change settings.
ATS PRO PALM DRILL
ATS PRO PALM DRILL (ATS6100)
p/n ATS6100
Price:$109.95
Qty
This is the drill I wish I had when I was still out there hauling a toolbox. It has everything a proper drill should have: speed, durability, and flexibility.
CRIMPER - NON-INSULATED TERMINALS A
CRIMPER - NON-INSULATED TERMINALS A (E300-055)
p/n E300-055
Price:$39.95
Qty
These high leverage crimpers are designed to work on non-insulated ring and spade terminals. The long arms require minimal force to make a strong crimp on your connectors. The ratcheting design ensures a proper crimp is made every time.
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT) (SH-S1)
p/n SH-S1
Closeout:$25.95
Qty
1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
12" EXTRA LONG BACK RIVET SET
12 EXTRA LONG BACK RIVET SET (AE4560)
p/n AE4560
Price:$35.95
Qty
These extended versions of our 2470 Back Rivet Sets are great to get into confined areas, They are especially useful to RV-10 builders who must back rivet some areas of the fuselage. 12" long straight, .401 shank
3 PIECE LOW PROFILE IMPACT ADAPTER SET
3 PIECE LOW PROFILE IMPACT ADAPTER SET (30936)
p/n 30936
Price:$10.95
Qty
Designed for impact use, these adapters are 20% smaller than standard adapters. They feature a knurled bands for enhanced grip. The spring loaded detent ball ensures that your sockets aren't going anywhere!
AMT HANDBOOK: AIRFRAME, VOLUME 1
AMT HANDBOOK: AIRFRAME, VOLUME 1 (ASA-8083-31V1)
p/n ASA-8083-31V1
Closeout:$30.95
Qty
This new FAA AMT Handbook—Airframe Volume 1 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
OIL & FILTER ANALYSIS KIT
OIL & FILTER ANALYSIS KIT (AVL-GA-M)
p/n AVL-GA-M
Closeout:$59.95
Qty
Analyse the debris found in your oil filter.
9" CRIMPING WIRE CUTTING STEEL PLIERS
9 CRIMPING WIRE CUTTING STEEL PLIERS (PM-924)
p/n PM-924
Closeout:$23.95
Qty
The 9" Steel Wire Cutting Crimping Pliers has a high quality SCM 440 hot-riveted design that features smooth wobble-free operation. It's High-Leverage design provides greater cutting and gripping power.
KNIPEX, MINI PLIER WRENCH 5"
KNIPEX, MINI PLIER WRENCH 5 (8603125)
p/n 8603125
Price:$49.95
Qty
A one-of-a-kind tool with unlimited possibilities, the patented, easy-to-use KNIPEX pliers wrench is a fantastic tool for fastening, gripping, holding, and bending.
RING TERMINAL 10-12AWG, #6 POST (25 EA)
RING TERMINAL 10-12AWG, #6 POST (25 EA) (AVT1012R-6K)
p/n AVT1012R-6K
Price:$9.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 10-12 AWG (Yellow) single and multi-strand wires. #6 post eyelet size. 25 pieces per package.
RING TERMINAL 14-16AWG, #4 POST (25 EA)
RING TERMINAL 14-16AWG, #4 POST (25 EA) (AVT1416R-4K)
p/n AVT1416R-4K
Price:$6.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 14-16 AWG (blue) single and multi-strand wires. #4 post eyelet size. 25 pieces per package.
RING TERMINAL 14-16AWG, #6 POST (25 EA)
RING TERMINAL 14-16AWG, #6 POST (25 EA) (AVT1416R-6K)
p/n AVT1416R-6K
Price:$6.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 14-16 AWG (blue) single and multi-strand wires. #6 post eyelet size. 25 pieces per package.
RING TERMINAL 14-16AWG, #8 POST (25 EA)
RING TERMINAL 14-16AWG, #8 POST (25 EA) (AVT1416R-8K)
p/n AVT1416R-8K
Price:$6.95
Qty
Molex AviKrimp® series aerospace terminals meet Mil-Spec MS-25036 QPL Class 1 and 2 standards for aerospace electrical connection. For 14-16 AWG (blue) single and multi-strand wires. #8 post eyelet size. 25 pieces per package.
CYCLO FOAM BONNETS (YELLOW)
CYCLO FOAM BONNETS (YELLOW) (CY71-135)
p/n CY71-135
Closeout:$11.95
Qty
A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
BIT, POWER SCREWDRIVER
BIT, POWER SCREWDRIVER (1205)
p/n 1205
Closeout:$0.95
Qty
Bosch reinforced screwdriver bits are designed to handle tough torque applications
30PC DELUXE KNIFE KIT
 30PC DELUXE KNIFE KIT (PD-395A)
p/n PD-395A
Price:$29.95
Qty
The deluxe hobby knife set contains 23 high quality carving blades and other accessories. The kit can be use on a wide variety of applications. The compact case takes up minimal space for storage and helps ensure the lasting quality of your blades.
PLIERS, CRIMPER 9.5"
PLIERS, CRIMPER 9.5 (E100-039)
p/n E100-039
Price:$14.95
Qty
This multi-functional tool is ideal for those working with un-insulated terminals. Used for both cutting and crimping solid or stranded wire. Constructed of hard steel for long lasting durability.
GREIDER TACK CLOTH
GREIDER TACK CLOTH (700844)
p/n 700844
Closeout:$99.95
Qty
This premium silicone-free tack cloth is the product of choice in certain painting applications. It is the product of choice for electronics manufacturers. It is an outstanding clean room tack cloth.

Related To Your Views