- CYCLO FOAM BONNETS (WHITE)
- P/N CY71-110
- This superfine pad is used in final buffing, after polishing with other pads. It's excellent for applying sealants and buffing out wax. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
- PUREWIPE SPONGE/PAD
- P/N 582562F
- These 4" x 4" sponges are made from 100% cotton woven gauze.
- NONWOVEN PUREWIPE
- P/N 992130
- Your plane can get so dirty and full of unwanted substances that it may just start to look sickly. Whatever ails your aircraft in terms of soiled surfaces can be cured with American Fiber's Purewipe Cleaning Cloths.
- NUTPLATE BLOCK, 1/4-20
- P/N CA-NPB-1/4
- The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
- RYMPLECLOTH
- P/N 780332
- Manufactured with 100% purified woven cotton, it’s unique crimped finish and firmly twisted yarns lift, entrap and remove particulates and, residual surface contamination.
- PUNCH AND DIE, WHITNEY
- P/N 45PD-5/32
- Replacement punch and die for #45 hand punch. 5/32" size
- NUTPLATE BLOCK, 4-10
- P/N CA-NPB4
- The Nut Plate Block will produce a flush nut plate on the back side and the rivet will be flush to the skin surface every time. It takes less then 1 minute to install a nut plate.
- CYCLO FOAM BONNETS (YELLOW)
- P/N CY71-135
- A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishers. 2 bonnets per package. For use with Bonnet Head Cyclo Polishers.
- AMT HANDBOOK: AIRFRAME, VOLUME 1
- P/N ASA-8083-31V1
- This new FAA AMT Handbook—Airframe Volume 1 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
- BIT, POWER SCREWDRIVER
- P/N 1205
- Bosch reinforced screwdriver bits are designed to handle tough torque applications
- CARBIDE BURR (3/4 x 1 CYL SGL CUT)
- P/N SA-S7
- 3/4" diameter by 1" long Cylindrical Carbide Burr (Type SA). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
- DRILL BIT 6" AIRCRAFT EXTENSION
- P/N 013-1
- #1 (0.2280), 135 degree split point. High speed steel. 6" Aircraft Extension series
- BIT, SCREWDRIVER
- P/N 213
- * INSERT BITS (1/4" HEX) 7/8" LENGTH * SCREW SIZE 6F-7R * SLOTTED TYPE
- THREADED DRILL BIT LONG
- P/N 5000-13L
- DRILL BIT, THREADED
- P/N 5000-24
- HIGH SPEED Discontinue per Des 6/14 CR
- DRILL BIT, THREADED
- P/N 5000-34
- HIGH SPEED no longer carry once stock is out (Beth 8/16/2012 10:51:16 AM)
- DRILL BIT, THREADED
- P/N 5000-38
- HIGH SPEED no longer carry once stock is out (Beth 8/16/2012 10:51:16 AM)
- DRILL BIT, THREADED
- P/N 5000-39
- HIGH SPEED no longer carry once stock is out (Beth 8/16/2012 10:51:16 AM)
- PUREWIPE CHEESECLOTH
- P/N 588039C
- Made from 100% woven cotton, our cheesecloth is very soft and absorbent. The openness of the weave assures the user that the wiping cloth will not displace the contaminants on the surface.
- GREIDER TACK CLOTH
- P/N 700844
- This premium silicone-free tack cloth is the product of choice in certain painting applications. It is the product of choice for electronics manufacturers. It is an outstanding clean room tack cloth.
- PROTAC 2L
- P/N 88031
- AVIATION MAINTENANCE TECHNICIAN SERIES: GENERAL
- P/N AMT-G3H
- Dale Crane's AMT Series is the essential resource to pass the FAA’Knowledge Exams for Aviation Maintenance. The General text covers the first section of the FAA?s required curriculum, incorporating an introduction to aviation.
- AVIATION MAINTENANCE TECHNICIAN SERIES: POWERPLANT
- P/N AMT-P3
- The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Powerplant details the technical maintenance of turbine and reciprocating engines.
- AVIATION MAINTENANCE TECHNICIAN SERIES: STRUCTURES
- P/N AMT-STRUC-3H
- The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Airframe: Structures details the subjects associated with aircraft structures as they relate to the landing gear.
- AVIATION MAINTENANCE TECHNICIAN SERIES: SYSTEMS
- P/N AMT-SYS-3H
- The Dale Crane AMTS textbooks are the ideal resource for the aeronautical knowledge needed to pass the FAA's AMT Exams. Systems covers the various systems involved with the airframe.
- AMT HANDBOOK: AIRFRAME, VOLUME 2
- P/N ASA-8083-31V2
- This new FAA AMT Handbook—Airframe Volume 2 is one of two volumes that replace and supersede Advisory Circular (AC) 65-15A. Completely revised and updated, this handbook reflects current operating procedures, regulations, and equipment.
- COLLET
- P/N C-1/4
- COLLET
- P/N C-10
- *** PRICE INCREASE 08/01/00 ***
- COLLET
- P/N C-12
- *** PRICE INCREASE 08/01/00 ***
- COLLET
- P/N C-21
- *** PRICE INCREASE 08/01/00 ***
- COLLET
- P/N C-40
- *** PRICE INCREASE 08/01/00 *** Thread size
- FAR AERONAUTICAL INFORMATION MANUAL (FAR/AIM)
- P/N FAR-AIM
- Federal Aviation Regulations / Aeronautical Information Manual (FAR/AIM). Regulations for General Aviation, Sport Pilots, & Instructors.
- LIGHTNING DETECTOR, DELUXE
- P/N LD50
- This portable and ground-based unit comes in a rugger, weather-resistant plastic case and is more powerful that other units and will detect storms within 40 miles but will start detecting thunderstorms up to 70 miles away.
- CARBIDE BURR (1/4 x 5/8 FLAME SHAPE SGL CUT)
- P/N SH-S1
- 1/4" diameter by 5/8" long Flame Shape Carbide Burr (Type SH). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
- CARBIDE BURR (5/8 x 5/16 90° TAPER DBL CUT)
- P/N SK-D6
- 5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Double cut for quick material removal. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
- CARBIDE BURR (5/8 x 5/16 90° TAPER SGL CUT)
- P/N SK-S6
- 5/8" diameter by 5/16" long 90° Taper Shape Carbide Burr (Type SK). Single cut for softer metals and a smoother finish. 1/4" shank fits most die grinders. Manufactured from solid fine-grained Carbide for strength and durability.
- PUNCH, TRANSFER
- P/N TP-1/4
- Discontinue per Des 6/14 CR
- BULB, HALAGEN FOR VO SCOPES
- P/N VO-1
- Halagen bulb for Vo-Scope
- MAGNAFLUX® BLACKLIGHT (100 WATT)
- P/N ZB-23A
- 100 watt Black Light for the Magnaflux Zyglo tester. Very high intensity short-wave ultraviolet (UV) light used to illuminate Magnaflux Zyglo and other dies that will fluoresce under black light. Includes transformer and power control unit.
FREE CATALOG
Get your copy of our latest printed catalog.
Save 5% NOW!
Sign up to get your personal discount code.
Copyright 2021 - Aircraft Tool Supply Company