ATS DELUXE RIVET SQUEEZER KIT

SKU: 5022-DX

Category: Rivet Squeezers

Price:$399.95

Our newest Rivet Squeezer Kit is designed to take on any riveting task. It contains the new ATS Heavy Duty Rivet Squeezer, a Bench Mount Kit, plus an extra 1-1/2" yoke head to reach into tight areas. You'll also get a complete set of squeezers and dimple dies in a convenient holder. See below for more information. ATS Pro Lifetime warranty.

Hand riveters are good for their portability, but the biggest complaint is that they are exhausting when you have serious riveting to do. The answer to this was a bench squeezer, but at hundreds of dollars, they are beyond most of our budgets -- until now! The new ATS Hand/Bench Rivet Squeezer gives you the best of both worlds at a price you can afford. It's a hand squeezer that converts to a free-standing bench squeezer in under 10 seconds! Just pin it into its cradle and you have a solid bench riveter; and when you need to use it as a hand riveter, simply unpin it. The ATS Hand/Bench Rivet Squeezer has the same design features as our popular 5022 squeezer, including a 360 degree swivel head, and an adjustable ram. It uses all of the same yokes and accessories as the 5022, and will squeeze up to 3/16" aluminum, or 5/32" steel rivets.

Features:  
* 1-1/2 & 3" reach with 1-1/4" opening  
* Yoke swivels a full 360 degrees and locks into any position for greater versatility  
* 5/8" adjustable ram eliminates the need for shims  
* 21" Overall length  
 

Part No.DescriptionQty
5022-3  
RS1009A  
RS-BK  
4703-2  
4704-2  
4705-2  
4706-2  
4710-2  
3710-2  
4263DP-2  
4264DP-2  
4265DP-2  
4266DP-2  
06785
3" Hand Squeezer  
1-1/2" Squeezer Head  
Bench Conversion Kit  
3/32" Squeezer Set  
1/8" Squeezer Set  
5/32" Squeezer Set  
3/16" Squeezer Set  
Flush Squeezer (1/2")  
Flush Squeezer (3/8")  
3/32" Dimple Die  
1/8" Dimple Die  
5/32" Dimple Die  
3/16" Dimple Die  
Squeezer Set Holder
1  
1  
1  
1  
1  
1  
1  
1  
1  
1  
1  
1  
1  
1
 
   
11 lbs (5Kg) shipping weight.

You might also be interested in...

May we recommend the following accessories to get the most from your selected product? Include any of these items with your purchase by entering the desired quantity before cicking any of the Add To Cart buttons.

LONGERON YOKE (5011 & 5022 SERIES SQUEEZERS)

SKU: RS1004A

LONGERON YOKE (5011 & 5022 SERIES SQUEEZERS) (RS1004A)
Designed to reach around angle brackets and channels typically found in longerons and sitffners. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers.
Price:$100.95
4" DEEP REACH YOKE (5011 & 5022 SERIES SQUEEZERS)

SKU: RS1005A

4 DEEP REACH YOKE (5011 & 5022 SERIES SQUEEZERS) (RS1005A)
Long 4" reach x 1-1/4" Gap Height to get into difficult areas. Recommend that you use this yoke with our Bench Mounting Bracket (p/n RS-BK) for extra stability. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers.
Price:$104.95
1-1/2" CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS)

SKU: RS1006A

1-1/2 CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS) (RS1006A)
Head clearance is only 1/4" to get into very tight areas. 1-1/2" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.
Price:$82.95
3" CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS)

SKU: RS1007A

3 CLOSE QUARTERS YOKE (5011 & 5022 SERIES SQUEEZERS) (RS1007A)
Head clearance is only 1/4" to get into very tight areas. 3" Reach x 1-1/4" Gap Height. Will not flex even when driving 3/16" rivets. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.
Price:$83.95